STRIX U1850 controls are designed for mounting directly onto the underside of conventional concealed heating elements and incorporate the upper part of the STRIX P72 360º rotation cordless. All variants feature a 2 pole dry switch on protection system which utilises 2 bimetal sensors for optimum dry protection performance. Additionally, all variants also feature a non-cycling dry protection system. An optional "automatic off" feature is available which causes the switch actuator to move to the off position when the appliance is removed from its power base, and prevents the appliance from being switched on again until it is placed back on its power base.

• For concealed sheathed element systems
• Non-cycling dry boil protection
• 360º cordless system
• Features Trip-Free design
• Integrated steam switch
• Compact design offers increased design flexibility

The STRIX U19 series is a variable temperature control system built around the U1830 series. It incorporates a dial used to select a desired water temperature at which the control will switch off. It is designed for use in water heating appliances where the heating element is hidden from the consumer. All variants include two-level, two pole protection against boiling dry or accidental dry switch on of the appliance.

• For concealed sheathed element systems
• Variable temperature control
• Auto switch-off at selected temperature
• Easy to re-heat to selected temperature
• Includes a standard boil setting
• Non-cycling dry boil protection
• 360° cordless system
• Features Trip-Free design
• Lift-off Switch-off (LOSO)
• Simple conversion for U1830 appliances
• Knob located on appliance centreline
• Use on plastic / metal / glass appliance
• Standard ø6mm 'D' spindle interface

The STRIX U44 control fitted to a compatible heater is an integrated system for electric heated moka coffee makers. The heater (stainless steel plate or aluminium die-cast) forms the base of the appliance pressure vessel. The U44 control provides all electrical connections, control features, and element mounting features in an easy to install unit.

• Optimised / consistent coffee brewing cycle
• Automatic / non-self resetting switch off after brew
• Integral Trip Lever (down for ON)
• Connections for Power-On neon light
• Integral Lift-Off-Switch-Off (LOSO) mechanism
• 360º Cordless system using STRIX P72
• 304 Stainless steel or aluminium die-cast heating surface
• Power rating and heat distribution optimised for moka performance
• Heaters covering all voltage ranges from 100V (Japan) to 240V (Europe)
• Single Screw fixing installation
• 2 levels of safety protection: Element dry boil and secondary thermal fuse protection
• First level of DSO protection is non-cycling and operates the trip lever
• Visual indication of completion of brew cycle
• Allows appliance to be left unattended
• Allows minimum cost appliance construction
• Neon light (if fitted) goes out when brewing is complete
• Use on stainless steel or aluminium die-cast appliances

The STRIX U34 series is an integrated control and element system for electric moka makers. The system provides all electrical connections, control features, element mounting and sealing features in a single, easy to install unit.

• Optimum / consistent coffee brewing cycle
• Automatic / non-self resetting switch off after brew
• Integral Reset button / Power on neon light
• Integral 360º Cordless system
• Element dry boil and secondary protection
• First level of DSO protection is non-cycling
• Appliance can be left unattended during use
• Cool-touch bottom cover allows safe/easy dis-assembly
• Neon light goes out when brewing is complete
• Use on plastic or metal appliances

The STRIX U26 series of controls are specifically designed for water heating appliances using thick film printed heating element where the element is hidden from the consumer. All variants incorporate two-level, two pole protection against boiling dry or accidental dry switch on of the appliance as well as an integrated steam switch. There is also an incorporated non-cycling and therefore energy saving dry protection system.

• For thick film printed element systems
• Non-cycling dry boil protection
• Features Trip-Free design
• 360º cordless system
• Integrated steam switch

STRIX U17 controls are designed for mounting directly onto the underside of conventional concealed heating elements and incorporate the upper part of the STRIX P72 360º rotation cordless. All variants feature a 2 pole dry switch on protection system which utilises 2 bimetal sensors for optimum dry protection performance. An optional "lift off reset" (LOR) feature is available on all variants which after a dry boil situation only allows the control to be switched back on when the appliance has been removed and replaced on its power base. This provides an optional non-cycling and therefore energy saving dry protection system.

• For concealed sheathed element systems
• Optional non-cycling dry boil protection
• For use with STRIX R48 remote steam switch
• 360º cordless system

The STRIX U1230 series of controls are specifically designed for water heating appliances where the heating element is hidden from the consumer. All variants incorporate two-level, two pole protection against boiling dry or accidental dry switch on of the appliance as well as an integrated steam switch. There is also an incorporated non-cycling and therefore energy saving dry protection system.

• For concealed sheathed element systems
• Non-cycling dry boil protection
• Features Trip-Free design
• For corded appliances
• Integrated steam switch

The STRIX U1250 series provides a more compact version of the U1230 control. The more compact size allows for installation into smaller appliances. These controls are specifically designed for water heating appliances where the heating element is hidden from the consumer. All variants incorporate two-level, two pole protection against boiling dry or accidental dry switch on of the appliance as well as an integrated steam switch. There is also an incorporated non-cycling and therefore energy saving dry protection system.

• For concealed sheathed element systems
• Non-cycling dry boil protection
• Features Trip-Free design
• For corded appliances
• Integrated steam switch
• Compact design offers increased design flexibility

The STRIX U11 series of controls are specifically designed for water heating appliances where the heating element is hidden from the consumer. All variants are designed for use with a remote steam switch and incorporate two-level, two pole protection against boiling dry or accidental dry switch on of the appliance.

• For concealed sheathed element systems
• For use with STRIX R48 remote steam switch
• For corded appliances