The STRIX U19 series is a variable temperature control system built around the U1830 series. It incorporates a dial used to select a desired water temperature at which the control will switch off. It is designed for use in water heating appliances where the heating element is hidden from the consumer. All variants include two-level, two pole protection against boiling dry or accidental dry switch on of the appliance.

• For concealed sheathed element systems
• Variable temperature control
• Auto switch-off at selected temperature
• Easy to re-heat to selected temperature
• Includes a standard boil setting
• Non-cycling dry boil protection
• 360° cordless system using STRIX P72
• Lift-off Switch-off (LOSO)
• Simple conversion for U1830 appliances
• Knob located on appliance centreline
• Use on plastic / metal / glass appliance
• Standard ø6mm 'D' spindle interface

The control is designed for incorporation within the base of the appliance and is available with a STRIX P72 360° cordless system. The control incorporates a variable temperature control system, automatic steam switch off and two levels of protection against dry switch on. The variable temperature control system is operated via a spindle on the side of the control. The integrated steam thermostat is operated by ducting steam down through the plastic body mouldings, or steam pipe through the base of the kettle, to the steam bi-metal.

• The control is fixed to the base of the appliance directly onto the heating element by means of screws, rivets or by clinching. It is then electrically connected to the heating element by either solid or flexible wires.
• The switch off temperature is adjusted via a rotary knob on the appliance centreline.
• The appliance bottom cover may be attached directly to the control.
• Further information, application drawings and advice are available from any STRIX Sales Office.

VOLTAGE: 220-240V RMS @ 50Hz or 100-120V RMS @ 60Hz

Designed for incorporation in Class 1 appliances. Designed to exceed all safety and endurance requirements of International and National safety standards.

Steel frame with high temperature flame retardant polymer body moulding (to U.L. 94-V1)

N/A

Certified to EN 60730-2-9 by B.E.A.B., also to National Standards by U.L., C.S.A. and S.A.A. As with all certification, approbation bodies reserve the right to carry out such tests as they consider necessary to prove the suitability of the component in the end-user application.

Configured to meet STRIX P72 Cordless system.

As the World's leading manufacturer of thermostatic controls for jugs and kettles, STRIX has unrivalled experience in the design, manufacture and tuning of these appliances for optimum performance in partnership with the appliance manufacturer. STRIX engineers are always delighted to work with your design teams at the earliest stages on issues including the following:

• Steam ducting design and related response times.
• Cosmetic cover design and its effect on steam control reset times.
• Element rating and options.
• The siting and operation of neon lights.