The STRIX P84 is a simple and robust cordless connector which has been developed for the harsh environments of electric irons and deep-fat fryers. The simple design combines standard Strix pins and a cordless contact housing with protective shutter.

• Robust design
• Developed for harsh environments

The Strix P84 is mounted on the power base or main body of the appliance. Three standard Strix pins are installed in the removeable part of the appliance and will interface directly with the cordless contact housing. All three high quality leaf springs in the contact housing terminate in male tab (4.8 x 0.5mm) at it's base. The contact housing has been specifically designed to prevent ingress of water, however and open design ensures creepage and clearance paths cannot be bridged.

Both the pins and contact housing are designed to be held positively between the upper and lower parts of the removeable and main (powered) parts of the appliance respectively. Prior to assembly of the contact housing care must be taken to ensure the connecting leads are not under strain or trapped by any part of the appliance.

VOLTAGE: 220-240V RMS @ 50Hz or 110-120V RMS @60Hz CURRENT: 13A @ 240V RMS 13A @ 120V RMS

• Designed for incorporation in Class I appliances
• Designed to exceed all safety and endurance requirements of International and National Safety Standards

Control Body - high temp flame retardant polymer (to U.L. 94-V1)

N/A

N/A

Quick connect receptacle tabs - female 4.8 x 0.5mm to IEC 760

As the World's leading manufacturer of thermostatic controls for jugs and kettles, STRIX has unrivalled experience in the design, manufacture and tuning of these appliances for optimum performance in partnership with the appliance manufacturer. STRIX engineers are always delighted to work with your design teams at the earliest stages on issues including the following:

• Appliance installation
• Power base drainage methods